Please be sure to change the Dr. Name, add/change a personal note (if needed) and change signature/phone
Letter

Dear Dr ________________,

It was a pleasure meeting you! [ Insert personal note! ] I just wanted to follow up with you as I am sure you are receiving your EDS supplies this week. Please let me know if you have any questions, or if there is anything I can do to help you; as you get started using your new EDS products.

EDS values education, in doing so, Essential Dental Seminars offers a 2-day, intense endodontic hands on workshop. During this 17 CE credit event, you will work side by side with world renowned leaders in endo to improve your skills and tackle more difficult cases. For more info, please visit: http://Essentialseminars.org

Below, I have listed a few products we discussed, and included links to instructional videos and directions.  Please don’t hesitate to contact me with any questions!

Very Best,

Your Name
Your Phone
Tango-Endo

Instrumentation Tips

• Set motor speed at 12,000 rpms
• Wipe instruments down when pulling up debris with Shaper and Finisher
• Make sure the instrument is loose in the canal prior to moving to the next in sequence
• Lubricate/irrigate regularly
• Limit use to 3 canals or less

Link to instructions: http://www.edsdental.com/tangoendo/tango_instructions.pdf
Link to Tango-Endo Handpiece care: http://www.edsdental.com/tangoendo/TangoHandpiece_instructions.pdf
Link to video: https://www.youtube.com/watch?v=dtL5w8YtcTE
Using your Tango-Endo handpiece with an electric motor:
http://www.edsdental.com/tangoendo/tangosettingendomotor.pdf
Tango-Endo Interview with Dental Economics Editor Dr. Chris Salierno: https://www.youtube.com/watch?time_continue=31&v=8Q7P5yAmVHc

SafeSiders and Endo-Express

Instrumentation Tips

• Set motor speed at 12,000 rpms
• Wipe instruments down when pulling up debris with Shaper and Finisher
• Make sure the instrument is loose in the canal prior to moving to the next in sequence
• Lubricate/irrigate regularly

Link to instrumentation instructions: http://www.edsdental.com/inst/safesiders/sidersinst.pdf
Link to air motor instructions: http://www.edsdental.com/inst/safesiders/airmotor_inst.pdf

EZ-Fill
Posts
Flexi-Overdenture and EZ-Change

Flexi-Overdenture placement video: https://www.youtube.com/watch?v=CuAtAvBwqeo

EZ-Change placement video: https://www.youtube.com/watch?v=CuAtAvBwqeo

Irrigation

EDTA Plus
• Thoroughly irrigate the canal and let stand for 60 seconds
• Before obturation, rinse with sodium hypochlorite and dry the canal.
Endo-CHX             
• Use 17% EDTA as a pre-rinse in the canal to remove the smear layer
• Continuously irrigate with Endo-CHX for a minimum of 2 minutes
Irritrol
Irrigate with Irritrol for 60 seconds 
About Irritrol: https://www.youtube.com/watch?v=US-5LYQI-a0

Ti-Core Flow+


• Chemical Cure: When using only the auto cure mode Ti-Core Flow+ has a 4 minute setting time (37°C/98°F). Lower temperatures delay the set.
• Light Cure: The material may be light cured for at least 40 seconds for 4mm maximum layer, anytime after extrusion from the syringe. A thin layer of less than 2mm will need only a 20 second exposure.
Ti-Core Flow+ instructions: http://www.edsdental.com/inst/ticore_flow/tc_flow+.pdf
How to place Ti-Core instructional video: https://www.youtube.com/watch?v=sk6qLO_Q4so

Fiber Posts